RVs are wonderful things to own, but they're complicated vehicles that can frequently have issues. Keep reading to learn 6 of the most common electrical system issues but also what you can do about them.
1) Check The Breaker:
This is where you should start all of your troubleshooting. Breakers are designed to shut down the power outlets in order to avoid fires, shocks, and overloads. There are also likely ground fault indicators or GFIs on the actual power outlets too, and they do the same thing, since they cut the power off for an outlet if they sense that there's too much electricity going through. Fortunately, these particular outlets come marked with 'Reset' buttons. If you trip such an outlet, just unplug everything from it before pressing the Reset button. Then, plug everything back in and you're in business. If in all this you ever need to replace a physical fuse, do so with a fuse of identical amperage; using one with higher amperage numbers could burn out electrical systems or even ignite a fire.
2) The 12-Volt System:
The 12-volt system of an RV is a collection of what are known as deep-cycle batteries. These are what provide juice to the leveling jacks, propane detectors, circuit boards, and the 12-volt-light. Most RVs have a converter inside that switches 120 voltage into 12 voltage. The batteries of the chassis have to use power in order to run the exterior lights and turn signals. If these lights don't blink right when you try to signal, then these batteries are likely the issue.
3) The 120-Volt House System:
The majority of household appliances use 120-volt current, so in the RV, that's what gives juice to the microwave, air conditioner, and electric water heater. If put a new appliance into your RV recently, consult the manufacturer to be sure it's a good fit for an RV. Its documentation should be labeled in terms of its volts, watts, and amps. Just like in permanent homes, issues in house electrical systems are a result of new appliances.
4) External Power Supply:
If your RV is plugged in but doesn't have any power, then the issue might be due to outside factors. Campgrounds are unfortunately well-known for ungrounded and even corroded wires. Drive your RV somewhere else so you can plug the RV into a better source.
5) AC Current Draws:
There are times that issues only happen if you are simultaneously operating more than one appliance. If this is the case, then be sure your family or travel group avoids running any two or more or your water heater, hair dryer, microwave, and air conditioner all at the same time. These are the biggest sources of power drain. Should you run any two at once, you're going to trip a breaker.
6) The Circuit Boards:
Find your electrical circuit breaker panel, probably right by the 12-volt DC battery bank. Open it, and then open all of your circuit breakers. Then, close them all, with the main input breaker last. Disconnect your 100-volt AC power from its pedestal, and remove any screws around the electrical panel so you can put it out. Check the terminals and connector tabs for acid accumulation. If necessary, clean it off with 12-fl.-oz. of water that's mixed up with 1-tsp. baking soda. Dry every surface completely before you attempt to restore power.
When you do any troubleshooting in regards to RV electrical issues, use these 6 steps to rule out most issues first, since they're the most common issues. If you are still having issues, then Fleet Tech can help. Find out how to get your RV looked at for repair. Call us today!
Engines come in all forms of sizes, styles, and may even differ on the way they function - but the way these operate is pretty simple. You need a power source, such as electricity, fuel, or gasoline and with that power, it'll run and make the machine work. Do take note, however, that not all engines run the same way, but that's basically the gist of what we're going after. Aside from being powered from a fuel source, there's also one more thing that makes these machines similar - most of them make use of coolant to basically keep your engine from overheating.
With a coolant's absence, the pressures, temperatures that are found in your engine's lines, pipes, hoses, and other components could shoot up - and may eventually cause damage that couldn't be reversed. It is crucial that you have the right amount of coolant, but at the same time, it is crucial that you're aware that you're using the right type and that the coolant does its job properly to ensure that your vehicle performs at its best.
As for the other parts of your vehicle, technology has played a crucial role and it has significantly improved in terms of improving engine fluids, coolants as such, and along with these changes, the "one-size-fits-all" rule seemed to have changed as well. Take coolants as an example. The formula being used has been changed - most especially for those heavy-duty vehicles that run on diesel - the ones that are extremely complicated. The newer coolant formula, on the other hand, has the nitrate removed. While these newer formulae and modified coolants have been changed, you have to remember that it's been made for the better - they just work differently on machines which is why you have to be careful when choosing which one to use.
To begin with, the newer coolant versions require more oil - but don't worry - it will still save you a whole lot of money because maintaining your coolant system won't be as often as it used to before. Additionally, without nitrates, that also means that there will be minimal damage to your coolant system's internal parts. As mentioned earlier, the new formulae for most of these coolant systems are expected to last longer and won't suddenly break down during extreme weather conditions, similar to what we're experiencing here in Alberta. Additionally, determining the coolant concentrations will be easier - which is actually an advantage. When the coolant is too high, the fluid can turn into a gel form when it gets too cold, which can eventually cause troubles to your lines. When it's too hot, the system won't be as affected. The great thing about this is that trained technicians could easily determine the right level as the coolants are needed to be tested with the help of a refractometer.
Just in case you're still not yet sold, the new coolants in the market now comes with corrosion protection. Along with that, it comes with pre-added additives that are very helpful in helping prevent a wide range of issues with your engine. This means that it requires less maintenance, but it would still work great and can keep your engine running for longer periods of time.
If you believe your vehicle requires a coolant flush to make sure it performs at its best - or whether you think that it needs some other work, like a tune-up for instance - preventive maintenance is what you need to make sure that you won't have to worry about larger repair costs. Fleet Tech is your go to team. Call us and we will be happy to be of assistance to you.
RV repair can often be costly and leave you feeling that you have paid too much for it. The worst comes if your RV is stuck in a location where it needs to be towed away. That means that you will have to pay for towing costs as well as the repair costs. This is where mobile RV repair services come up.
If you are traveling and are stuck with your RV somewhere that you cannot access towing services, you can hire mobile RV repair to come to your aid. It could be that the ac is broken or the electrical system has failed. In any of these cases, an RV mobile repair service will be of great help. It is important to have a service that you are sure will get you what you need. After all, you never want to be stuck somewhere and find out that you have to call another service for repairs. It means that you would be paying more and staying with a damaged RV for more days.
Here are the guidelines for choosing a great RV mobile repair service.
Do They Specialize?
There are some RV repair companies that have technicians for certain models but not for others. This is the reason you must check if they have an expert that handles the repair of the exact model of RV that you have. This will ensure that the job is done quickly and efficiently because they are aware of the common issues that affect your RV. It saves you time as well.
How Is Their Reputation?
Any great service that values their clients will ensure that they have a way to get feedback from their customers. You should check these reviews out so that you can know what quality of work should be expected. If the service is poor you will notice many negative comments about their services from the customers who hired them recently. If you spot anything fishy do not hire that service.
Choose a service that will feel pocket-friendly to you. It is not always true that the most expensive price is the best. You should check out if they have the right technique as well. On the other hand, prices that are suspiciously low could be a sign of poor quality services. Do not forget to check out the warranties. If they have valid warranties for future repairs then you should definitely hire them. It will save you more repair costs in the future.
Choose a repair service that will be available when you call. The whole reason you will be hiring them is to save time and costs. Pick a company that can avail themselves to the customers. If they always have a technician on the clock, even better.
Mobile RV can really save you if you are in a bind and on the road. Fleet Tech can save you time as well as costs and ensures that you do not have to go through the stress of getting stranded, contact us today for the best mobile RV repair services.
Have you experienced a breakdown while traveling? Taking the car to a repair shop is a waste of time and money. Evidence from 2016 has found that a portion of all long-haul truck costs amount to over $66,000. This is being spent on truck operation essentials, such as oil, fuel, lubricant and, of course, repair expenses.
Further research indicates that repair and maintenance expenses for commercial trucks can total approximately $15,000 per annum. The fee goes toward alternators, air hoses, brakes and wiring. Payments on the tires exclusively can be roughly $4,000 per annum.
Imagine if you were able to reduce the expenses and save time by performing truck repairs while still on the road. Consider how much faster the mobile truck repair option is to traditional repairs, and how it can benefit your company. This article will discuss how you can get your truck back on the road more quickly.
What Is A Mobile Truck Repair And How Does It Work?
Consider the option of having truck maintenance and repairs meet you wherever you and your trucking fleet are. This is the basic principles behind mobile truck repair. Using this service, you can conduct repair and maintenance services from any location when they are most needed. This ensures that you and your trucking fleet provide smooth services.
How Does Mobile Truck Repair Benefit The Average Person?
One of the core benefits of using a mobile truck repair is the accessibility of services for the trucking fleet. Moreover, the mobile repair service can be used during emergencies when a truck breaks down in the middle of a road, and there is no repair store available. In this situation, the fleet trucks can reach you instead of you searching for help.
This service also offers many other benefits which will be discussed below.
#1: Saving You Time
The use of mobile truck repair can be useful in that it saves time for repairs and maintenance. If a truck has a breakdown, it is possible to contact a technician on-site. Furthermore, you can use one of the other services during your “off hours”.
By using this option, you can remove any inconvenience experienced with truck breakdowns and the additional trouble of moving the truck into the repair store bay. On-site solutions reduce the downtime of damaged trucks and increase the time for the truck to be back on the road.
#2: Saving You Money
In addition to saving you time, using mobile truck repair services can save you money. This is not only saving money for reaching repair shops but also having the truck maintained on the road to avoid any damage.
Trucks need to have regular maintenance and routine checks. By conducting checks, you can resolve any small problems on the truck before it escalates. Smaller engines or tire damage can be addressed before it results in a breakdown helping you reach the next roadside truck repair store.
Final Words On The Matter
When considering the efficiency and convenience of mobile truck repair services,consider Fleet Tech as the service that can help you get back on the road more speedily. Due to the accessibility of on-site truck repairs, you can reduce any downtime caused by towing the truck to a repair shop, we are the team to call. This allows you more time to have the truck up and running.
Truck Maintenance Enhances Road Safety
If you own a truck or trucks, it is a good idea to focus on truck maintenance. Regular inspections and upkeep are very important. You should take your time when looking for a truck maintenance & repair shop to get quality services. A good shop will ensure that your truck lasts for a long time. So, take your time when looking for a truck maintenance & repair shop.
Check and Change the Oil
As a truck owner, it is good to go to a professional truck repair mechanic to have your oil checked and changed periodically. Doing this will help your truck run smoothly as it ensures the proper functioning and lubrication of your truck’s engine. It is good to have your oil checked and changed every 2,000 or 3,000 miles.
Check All the Fluids
Checking all the fluids is very important as it can help your truck run smoothly in the long term. It is very important to keep the engine cool. Otherwise, smoke could end up coming out of your truck’s hood. Inspect the levels of the fluids at least twice a year. It is also important to check the transmission fluid as it deteriorates over time. When this happens, it becomes darker. Ensure that the transmission fluid is checked and changed every 25,000 miles.
Eight-wheel trucks often have more traction in the rear tires. Rear tires wear very fast as they carry most of the load. Changing the position of your truck’s tires will make the tires wear evenly. Besides, it will improve road safety.
Check the Suspension of Your Truck
Since you drive your vehicle in all kinds of road and weather conditions, it is good to ensure that your suspension is checked from time to time. Otherwise, it could cause your loads to shift.
If you are looking for quality truck maintenance in Tampa Bay, consider Fleet Tech for quality services. We have a team of truck & trailer repair technicians who know how to do the job in the best way possible as they are experienced and skilled in truck maintenance. The good thing is that you will get these services at a pocket-friendly price. If you would like to know more about the company and its services, call us today!
If you notice that the hydraulic brakes are not working as they should ensure that they are repaired as soon as possible. This is because a vehicle’s brakes are very important as they are the ones that make a vehicle stop when necessary. They make driving safe and can be used during an emergency when the car has to be stopped immediately.
If you have to apply more pressure to your brakes than before for them to work or if the breaks don’t work immediately after applying them, it is time to consider repairing them. However, you should avoid doing automobile repairs all by yourself. It is good to let a professional do these repairs. Why should you let a professional repair your breaks? Here’s why:
Professionals Have the Right Tools and Equipment
One of the things that enable professionals to repair brakes in the best way possible is the fact that they have the right and latest tools and equipment to do the job. Besides, they know how to use the tools used to repair brakes as they are experienced and knowledgeable in brake repairs.
And the good thing is that a licensed professional is well trained and skilled. So, whether you have a small brake problem or a major problem with your brakes, you can be sure that a licensed Fleet Tech professional can repair it.
Licensed Professionals Use Quality Materials
In most cases, brake problems are caused by a faulty vehicle component. A licensed professional understands this and uses quality hardware and parts to ensure that such a problem is avoided. Such a professional knows the right materials for your truck meaning that you will not have to worry about a faulty vehicle component causing improper functioning of your tuck’s brakes.
As you can see, there are many reasons why it is a good idea to look for an expert to repair your truck’s brakes. Is your truck or trailer experiencing any problems? Or does any of your engine component experienced any problems? If so, call us and let our team of experienced and skilled professionals help solve your problem in the best way possible. And the good thing about our company is that it offers 24/7 roadside assistance meaning that you can get our services at any time.
If your truck starts consuming more fuel than it used to, consider truck repair service. This is because it indicates that your truck’s engine may be having a problem. In most cases increased fuel consumption is caused by damaged or worn out fuel injectors as they are the ones that deliver fuel to the combustion chamber of your truck’s engine.
Loss of Power
Truck repairs in Tampa Bay are very important when your truck’s engine is experiencing any problems. Has your engine started struggling? Or has the pulling of your truck changed? Or has your truck’s top speed decreased? If you have answered yes to any of these questions, it’s time to consider truck repair as all these could indicate a problem with your engine. Valves, piston rings, or a head gasket can make your truck lose its muscle.
Increased Oil Replacement
If you notice that you have started checking your oil regularly or when you notice that you have had to add more oil between your scheduled oil changes, consider truck repairs. This shows that your engine is burning or leaking oil due to problems with your cylinder liner or piston rings.
Blue or Black Exhaust Plumes
If your emissions started changing color, it is time for truck repairs. Blue or black exhaust fumes are caused either by too rich or too lean fuel or burning oil in the engine and could be problems with your piston rings, cylinder liner, or injectors.
If you realize that there are excessive amounts of unburnt fuel or excessive amounts of smoke blowing into your crankcase, it’s time for truck repairs. This could be caused by problems with the steel rings or wear on your piston liners.
Poor Performance of Your Truck’s Brakes
If the efficiency of your brakes has reduced or if traveling downhill makes you feel nervous, it is good to let a professional fix the problem before it worsens. This is because these problems could be a sign of lost cylinder compression or damaged or faulty piston rings and the cylinder liner. If your semi has any problems, it is good to consider truck repair service before the problem becomes worse. Call us let us help.
Nobody loves when their trucks experience a malfunction while on the road delivering goods for a client. Well, to prevent such issues, you must do a few maintenance checks to ensure the truck is in good condition. The best thing is that some maintenance techniques do not need a professional because you can do them yourself. However, it is important to note that it is always wise to take your truck to a trusted truck repair service center to avoid other problems from occurring.
Below are simple DIY truck maintenance tips that you can do at home or work:
• Checking Engine Oil Levels
Every truck driver knows that they should change their engine oil after every 3000 miles or after 3 months if you have not used the truck for a while. However, after some time, the oil levels may decrease due to either leaks or piston oil burns. When the level of oil decrease, it is wise to increase. For this reason, it is recommended to check the engine oil level before undertaking any job. Of course, before you add, follow the specifications or guidelines found in the truck’s manual.
If you need an oil change, you can either change the oil yourself or let an expert do it for you at the nearest truck repair service center.
• Checking The Tires And Tire Pressure
Truck tires curry huge and heavy loads, which makes them to always be in constant stress. This is why it is important to always check your tires before, during, and after a trip; to ensure they are in the best condition as possible. If by any chance you get one any tire that needs addressing, do not wait, repair the immediately to avoid damage to others.
If you are looking for a professional and experienced truck repair service provider in Tampa Bay, then consider Fleet Tech for all your truck repairs. They offer the best and yet affordable repair services that will ensure your truck stays on the road. Call them today!
It is a known fact that trucks are heavy-duty vehicles, widely known for their variety of application. However, their main application is the transportation of cargo from one location to another. For this reason, they are susceptible to wear and tear, damages, heating, and damages due to intense traveling. This is why maintaining your truck is very important. If you are planning to upgrade your old truck, then booking a truck service is the best way forward.
Remember, maintaining a truck is very different from a regular sided vehicle like sedan or family van. Trucks need highly experienced professionals who fully know what these trucks need and way to improve their performance. An amateur cannot handle the requirements and technicalities trucks demand. Your truck needs a professional.
As such, there are many reasons to book a local truck service. Well, below are a few reasons why truck service is a wise solution:
As mentioned above, trucks are complicated vehicles that demand extra care when handling them. Only a truck mechanic can handle the demands a truck has to offer. They are equipped with all needed tools and equipment suitable for the work. If your truck develops mechanical issues while in Tampa Bay, worry not because there are professional truck service providers who can repair professionally.
The truth is that dealing with a truck problem, especially while on the road is not an easy thing. As a matter of fact, identifying the problem can be time-consuming, especially if you do not know much about truck engines. This is why you need an experienced mechanic. They will help you save time and money. They are capable of handling and finishing truck repairs on time.
Fleet Tech is a professional service provider that you should turn to if you are looking for a professional truck repair services. They are available 24/7 and respond to all emergencies in a timely fashion. They have dedicated professionals who fully know their craft. To know more, visit them in Tampa Bay, or contact them.
For drivers, any downtime leads to loss of profits and truck breakdowns can translate to a significant hit to their bottom line. It is also usually tough for customers too. According to studies, in the absence of truck deliveries, stores would run out of food in about 3 days while hospitals would run out in as little as 24 hours.
Fortunately, if we can avoid the most common causes of truck breakdown, it is possible to reduce their frequency. Read on to learn more.
How to Avoid a Truck Breakdown
The last thing you would ever want on your journey is having to deal with a breakdown. Here are top 3 reasons for truck breakdown.
Have you ever seen large scraps of tire shreds in your lane when traveling down the highway?
Tire maintenance involves much more than just proper inflation. Missing tread and low tread depth can also contribute, and these two are incredibly easy things for you to fix prior to hitting the road. Ensure that you do a complete pre-trip inspection to avoid getting on the road with dangerous tires.
If these appear to be recurring problems very often, you need to check to ensure that you are using the proper commercial truck tires and that you don’t have misaligned axles because those can lead to irregular wear on the tires.
Your battery, starter motor, and alternator are responsible for your truck’s electrical systems. Many systems in your truck rely on electricity. Things such as the radio, thermostat, air conditioning, starter and ignition, and any computer equipment that you might have all draw electricity.
Using the truck’s electrical system for unnecessary comforts can lead to a massive strain on the system. Think about what you actually need and what you don’t and skimp on the unnecessary stuff to keep the load lower. One way to do this is to switch to LED lighting. You get the same lumens without consuming too much power, and this could mean the difference between being late and delivering on time.
Electrical repairs can be expensive due to the labor and time required to find the source of the problem. With so many potential causes, it may take a long time to find one little wire that causing a short.
A truck’s brakes have a certain level of regular corrosion that foes along with wear and tear. However, the friction, heat, and pressure the brakes undergo during long trips can lead to other issues with the brakes that may leave you stranded.
Brakes can get air leaks or the air lines may freeze, typically because of internal water contamination. Ensure that your brakes are properly maintained so that you reach your final destination without any problems and within the shortest time possible.
On the Road Again
Nobody wants their truck to break down on their trip. Ensure that you keep the top 3 causes of road problems in mind while conducting your pre-trip inspection as well as throughout your journey.
For additional information check out the services we offer, visit our website. We look forward to helping you get on your way. Contact us for more information.